| Quantity: | |
|---|---|
The 6000 PSI Female Threaded Tee for Drainage delivers high-pressure performance in critical industrial drainage systems, providing a robust junction for directing high-volume fluid flow. Constructed from forged carbon steel (ASTM A105N) with optional 316 stainless steel trim for corrosive applications, this tee features female NPT threads conforming to ASME B1.20.1 standards across all ports . Rated for maximum operating pressure of 6,000 psi (413.7 bar) at 72°F (22°C) and derated to 3,000 psi (206.8 bar) at 360°F (182°C), it accommodates pipe sizes from 1/2” to 4” to handle diverse high-pressure drainage requirements . The tee’s forged construction eliminates internal defects, making it suitable for applications involving water hammer, pulsating flow, and abrasive media common in industrial drainage systems.
ASTM A105N carbon steel provides a tensile strength of 60,000-80,000 psi and yield strength of 30,000 psi minimum, ensuring structural integrity under extreme pressure conditions and preventing catastrophic failure .
Each port features Class 2B NPT threads with a 1/16” per inch taper and rolled thread finish, providing leak-tight sealing with compatible male threads when properly torqued and sealed .
The internal flow path features a radius corner design with a surface finish of Ra 3.2 μm to minimize turbulence and reduce erosion from abrasive drainage media, extending service life by 40% compared to standard tees .
Operates reliably from -20°F to 650°F (-29°C to 343°C), making it suitable for both cryogenic drainage and high-temperature industrial wastewater applications.
This high-pressure threaded tee is essential for:
• Oil and Gas Production: High-pressure drainage from wellheads and separation systems.
• Industrial Pressure Washing: Directing wastewater from high-pressure cleaning equipment.
• Power Generation: Boiler blowdown lines and high-pressure condensate drainage.
• Mining Operations: Handling abrasive slurry drainage in mineral processing.
• Chemical Processing: High-pressure waste transfer in reactor drainage systems.
Use PTFE tape or anaerobic thread sealant rated for 6,000 psi service. Avoid sealants containing particulate matter that could restrict flow.
Pressure rating decreases by approximately 50% at 360°F (182°C) and by 75% at 650°F (343°C) to account for material strength reduction at elevated temperatures .
The standard carbon steel construction resists mild corrosion, but for acidic or chlorinated drainage, specify the 316 stainless steel version for enhanced chemical resistance.
For 1/2”-1” sizes: 50-70 ft-lbs; 1 1/4”-2”: 100-120 ft-lbs; 2 1/2”-4”: 150-200 ft-lbs. Always use a calibrated torque wrench to ensure proper sealing.
The 6000 PSI Female Threaded Tee for Drainage delivers high-pressure performance in critical industrial drainage systems, providing a robust junction for directing high-volume fluid flow. Constructed from forged carbon steel (ASTM A105N) with optional 316 stainless steel trim for corrosive applications, this tee features female NPT threads conforming to ASME B1.20.1 standards across all ports . Rated for maximum operating pressure of 6,000 psi (413.7 bar) at 72°F (22°C) and derated to 3,000 psi (206.8 bar) at 360°F (182°C), it accommodates pipe sizes from 1/2” to 4” to handle diverse high-pressure drainage requirements . The tee’s forged construction eliminates internal defects, making it suitable for applications involving water hammer, pulsating flow, and abrasive media common in industrial drainage systems.
ASTM A105N carbon steel provides a tensile strength of 60,000-80,000 psi and yield strength of 30,000 psi minimum, ensuring structural integrity under extreme pressure conditions and preventing catastrophic failure .
Each port features Class 2B NPT threads with a 1/16” per inch taper and rolled thread finish, providing leak-tight sealing with compatible male threads when properly torqued and sealed .
The internal flow path features a radius corner design with a surface finish of Ra 3.2 μm to minimize turbulence and reduce erosion from abrasive drainage media, extending service life by 40% compared to standard tees .
Operates reliably from -20°F to 650°F (-29°C to 343°C), making it suitable for both cryogenic drainage and high-temperature industrial wastewater applications.
This high-pressure threaded tee is essential for:
• Oil and Gas Production: High-pressure drainage from wellheads and separation systems.
• Industrial Pressure Washing: Directing wastewater from high-pressure cleaning equipment.
• Power Generation: Boiler blowdown lines and high-pressure condensate drainage.
• Mining Operations: Handling abrasive slurry drainage in mineral processing.
• Chemical Processing: High-pressure waste transfer in reactor drainage systems.
Use PTFE tape or anaerobic thread sealant rated for 6,000 psi service. Avoid sealants containing particulate matter that could restrict flow.
Pressure rating decreases by approximately 50% at 360°F (182°C) and by 75% at 650°F (343°C) to account for material strength reduction at elevated temperatures .
The standard carbon steel construction resists mild corrosion, but for acidic or chlorinated drainage, specify the 316 stainless steel version for enhanced chemical resistance.
For 1/2”-1” sizes: 50-70 ft-lbs; 1 1/4”-2”: 100-120 ft-lbs; 2 1/2”-4”: 150-200 ft-lbs. Always use a calibrated torque wrench to ensure proper sealing.
