| Quantity: | |
|---|---|
The 6000mm Gray Aluminum Pipe for Air Systems revolutionizes long-distance compressed air distribution with its extended length design, minimizing joint connections and potential leak points in industrial installations. Measuring 6000mm (19.69 feet) in length, this piping solution is constructed from high-strength 6061-T6 aluminum alloy with a RAL 9007 gray powder coating that provides exceptional corrosion and UV resistance . Available in diameters from 1” to 6”, it operates at a maximum pressure of 200 psi (13.8 bar) and maintains integrity across a temperature range of -4°F to 176°F (-20°C to 80°C). The extended length reduces the number of connections by up to 70% compared to standard 6-meter pipes, significantly lowering installation time and leakage risks in large facilities.
At 6000mm, this pipe reduces the number of joints required for long runs by 67% compared to 3-meter pipes, directly minimizing potential leak points and pressure loss .
The thermosetting polyester TGIC powder coating provides 1000 hours of salt spray resistance (ASTM B117) and excellent UV protection, making it suitable for both indoor and outdoor installations without degradation .
The 6061-T6 aluminum offers a tensile strength of 45,000 psi and yield strength of 40,000 psi, providing the rigidity needed for long unsupported spans while remaining lighter than steel alternatives .
Each pipe features square-cut, deburred ends with tight dimensional tolerances (±0.5mm) to ensure proper fitting alignment and seal integrity during installation.
This long-length aluminum pipe is ideal for:
• Large Manufacturing Facilities: Long-distance air distribution with minimal joints.
• Warehouse Facilities: Overhead compressed air lines spanning production areas.
• Automotive Plants: Extended air runs for robotic assembly lines.
• Aerospace Facilities: Clean air distribution in large-scale manufacturing bays.
• Logistics Centers: Wide-span air systems for pneumatic material handling.
For 1” to 2” diameters: 10 feet (3.0m); 3” to 4” diameters: 12 feet (3.6m); 5” to 6” diameters: 15 feet (4.5m) between supports.
The RAL 9007 coating is designed to accept industrial paints without additional priming, allowing for color coding of different air lines if required.
Yes, the aluminum pipe can be easily cut with standard pipe cutters, though we recommend reaming the ends to maintain proper fitting compatibility.
A 6000mm (19.69ft) length of 6” diameter pipe weighs 42.5 kg (93.7 lbs), approximately 60% lighter than an equivalent steel pipe, reducing structural support requirements.
The 6000mm Gray Aluminum Pipe for Air Systems revolutionizes long-distance compressed air distribution with its extended length design, minimizing joint connections and potential leak points in industrial installations. Measuring 6000mm (19.69 feet) in length, this piping solution is constructed from high-strength 6061-T6 aluminum alloy with a RAL 9007 gray powder coating that provides exceptional corrosion and UV resistance . Available in diameters from 1” to 6”, it operates at a maximum pressure of 200 psi (13.8 bar) and maintains integrity across a temperature range of -4°F to 176°F (-20°C to 80°C). The extended length reduces the number of connections by up to 70% compared to standard 6-meter pipes, significantly lowering installation time and leakage risks in large facilities.
At 6000mm, this pipe reduces the number of joints required for long runs by 67% compared to 3-meter pipes, directly minimizing potential leak points and pressure loss .
The thermosetting polyester TGIC powder coating provides 1000 hours of salt spray resistance (ASTM B117) and excellent UV protection, making it suitable for both indoor and outdoor installations without degradation .
The 6061-T6 aluminum offers a tensile strength of 45,000 psi and yield strength of 40,000 psi, providing the rigidity needed for long unsupported spans while remaining lighter than steel alternatives .
Each pipe features square-cut, deburred ends with tight dimensional tolerances (±0.5mm) to ensure proper fitting alignment and seal integrity during installation.
This long-length aluminum pipe is ideal for:
• Large Manufacturing Facilities: Long-distance air distribution with minimal joints.
• Warehouse Facilities: Overhead compressed air lines spanning production areas.
• Automotive Plants: Extended air runs for robotic assembly lines.
• Aerospace Facilities: Clean air distribution in large-scale manufacturing bays.
• Logistics Centers: Wide-span air systems for pneumatic material handling.
For 1” to 2” diameters: 10 feet (3.0m); 3” to 4” diameters: 12 feet (3.6m); 5” to 6” diameters: 15 feet (4.5m) between supports.
The RAL 9007 coating is designed to accept industrial paints without additional priming, allowing for color coding of different air lines if required.
Yes, the aluminum pipe can be easily cut with standard pipe cutters, though we recommend reaming the ends to maintain proper fitting compatibility.
A 6000mm (19.69ft) length of 6” diameter pipe weighs 42.5 kg (93.7 lbs), approximately 60% lighter than an equivalent steel pipe, reducing structural support requirements.
